Austrian Napoleonic Flags: 1792, 1804 and 1806 Issues Explained

By Victrix Limited 28mm miniatures | Published: 2026-11-03

Category: Guías prácticas

Learn how to choose and apply Austrian flag transfers from the 1792, 1804 and 1806 issues to give your 28mm Napoleonic infantry authentic variety.

Quick answer

Use the Austrian A4 flag sheet to mix 1792, 1804 and 1806 issue flags across your regiments rather than giving every unit the same pattern. The mix reflects how Austrian regiments held on to older colours until they wore out, and it adds variety to your 28mm Napoleonic infantry.

Why three flag issues appear in one army

Austrian regiments did not replace their colours on a strict schedule. The 1792 and 1804 issues remained in use into 1809 and beyond, and regiments typically kept their flags until they wore out. That means a force from the Napoleonic period can legitimately show a mixture of issues, especially in units that had not recently received new colours.

For your 28mm collection, this is an advantage: you can vary the flags across regiments without breaking historical plausibility. The key is to treat the flag issue as part of each regiment’s individual history, not as a uniform rule for the whole army.

What the Austrian A4 flag sheet gives you

The sheet contains 18 Austrian flags covering the 1792, 1804 and 1806 issues. That number is enough to spread different patterns across several regiments or to concentrate on one issue if you prefer a more uniform look. Because the sheet is A4, you can print or use it at a size that suits 28mm standards, but check the scale before committing to a batch.

Steps for choosing and applying Austrian flag transfers

Decide the regiment’s flag issue: Pick one issue per regiment based on its service history or your preferred look. A common mistake is mixing issues within a single regiment’s colour pair; keep each regiment’s flags consistent with one issue unless you have a specific reason to do otherwise. Check that both flags for a regiment come from the same issue.
Plan the mix across your army: Spread the 1792, 1804 and 1806 issues across different regiments to suggest older and newer colours. Avoid giving every regiment the same issue if you want a campaign-worn look. Aim for at least two different issues across a brigade.
Prepare the flag surface: Apply the transfer to a smooth, clean surface. If you are using paper or foil flags, seal them first so the transfer adheres evenly. A common mistake is applying transfers to textured or dusty surfaces, which leads to silvering and poor adhesion. Test one transfer on a spare flag before committing to a batch.
Position and set the transfer: Align the transfer carefully before pressing it down. Work from the centre outward to push out air bubbles. Check that the flag’s design is centred and that the edges are fully adhered. Inspect the edges under good light before moving on.
Seal and protect the finished flag: Once the transfer is dry, apply a thin protective coat or varnish to seal it. This is especially important on flags that will be handled during games. Avoid heavy coats that obscure detail. Let the seal fully cure before attaching the flag to the miniature.

Product facts

Austrian A4 flag sheet 1792,1804 and 1806 issues: The sheet includes 18 Austrian flags from the 1792, 1804 and 1806 issues. Having multiple issues on one sheet lets you vary flags across regiments without buying separate sheets.
Austrian A4 flag sheet 1792,1804 and 1806 issues