Zurück zum Blog
Anleitungen 2026-11-21 Victrix Limited 28mm miniatures 0 Aufrufe

How to Apply 2CRL(W&E)2 and 33rd Flag Transfers

How to Apply 2CRL(W&E)2 and 33rd Flag Transfers

Learn to apply 2CRL(W&E)2 Roman shield transfers and 33rd flag kits to 28mm miniatures. Step-by-step guide with key tips for decal application.

What You Need to Know Before Starting

This guide covers two different transfer products from Victrix Limited: the 2CRL(W&E)2 Roman Legionary shield transfers (15mm scale) and the 33rd flag kit (28mm scale). Both are designed for wargaming miniatures but serve different purposes. The shield transfers are made for Forged in Battle's 'War & Empire' 15mm miniatures, while the 33rd kit includes two flags, two banner poles, and two flag finials with cords for 28mm figures.

Product Evidence

  • 2CRL(W&E)2: 15mm scale Early 2nd Century Roman Legionary shield transfers, designed for Forged in Battle's 'War & Empire' miniature range. These transfers are specifically scaled for 15mm figures, not 28mm. Ensure your miniatures match this scale before purchasing.
    2CRL(W&E)2
    2CRL(W&E)2
  • 33rd: 28mm flag kit consisting of 2 flags, 2 banner poles, and 2 flag finials with cords, plus instructions. This is a complete flag set for 28mm wargaming figures. The kit includes assembly components, but the transfers come un-cut, so you'll need to trim them carefully.
    33rd
    33rd

Step-by-Step Application Process

For both types of transfers, the general process is similar. Work in a clean, well-lit area and have a sharp hobby knife, tweezers, a soft brush, and a bowl of clean water ready.

  1. Prepare the Transfer: Cut out the individual transfer from the sheet. For the 33rd flag kit, note that transfers come un-cut, so you'll need to trim each flag and finial separately. Use a sharp hobby knife or scissors for clean edges.
  2. Soak in Water: Dip the transfer in water according to the product instructions. Slide it off the backing paper onto the model using tweezers. For shield transfers, position it on the shield surface; for flag transfers, apply to the flag fabric before mounting on the pole.
  3. Position and Adjust: While the transfer is still wet, slide it into the exact position. Use a soft brush to gently smooth out air bubbles. For flag transfers, ensure the flag is centered on the pole and the finial is aligned.
  4. Seal and Finish: Allow the transfer to dry completely (a few hours). Apply a thin coat of matte varnish or decal setting solution to protect the transfer and blend the edges. For the 33rd kit, attach the banner poles and finials as per the included instructions.

Common Mistakes to Avoid

Do not rush the soaking step – too little water and the transfer won't slide; too much and it may curl. Always test the position on a dry model first to avoid misplacement. For the 33rd kit, the images displayed may not be actual size, so check the transfer dimensions against your flag pole before cutting.

What the Supplied Information Does Not Cover

The catalog does not specify paint colors, primer, or varnish brands. Use standard hobby paints and sealers compatible with plastic or metal miniatures. There are no detailed assembly instructions for the 33rd poles beyond the kit's own guide – follow the included steps for pole and finial attachment.

Verwandte Artikel

Customer Service
Startseite
Produkte
Warenkorb
Profil