How to Base 20mm Round Plastic Bases for Wargaming

Quick answer

Assembling 20mm round plastic bases is straightforward: clean the bases, apply adhesive to the textured surface, and press your miniature in place. These bases work well with movement trays and have a chamfered edge for a neat look.

Step-by-step assembly guide

1. Clean the bases: Wipe each 20mm round plastic base with a dry cloth to remove any dust or release agent from manufacturing. This step ensures the adhesive bonds properly. Skip cleaning and the glue may not hold as well.
2. Apply adhesive to the textured surface: Use a thin layer of plastic glue or super glue on the textured area of the base. The texture is designed to increase surface area for a stronger bond. Avoid applying too much glue, which can seep out and create a messy finish. A little glue goes a long way; wipe off any excess immediately with a damp cloth.
3. Position the miniature: Press your miniature firmly onto the base, holding it in place for 10–15 seconds. Ensure the miniature is centered and aligned as you want it. The chamfered edge will help the base sit flat on the table. Double-check alignment before the glue sets—adjustments are difficult once it cures.
4. Allow the glue to cure: Let the assembled base rest undisturbed for at least 30 minutes (or as long as the glue instructions recommend). This ensures the bond is strong enough for handling and painting. Rushing this step can cause the miniature to come loose during painting or gameplay.
5. Optionally attach to movement trays: Once the glue is fully cured, you can place the base onto a VXB010 skirmish movement tray. The round shape fits snugly, and the tray makes it easy to move multiple miniatures at once. If you plan to use movement trays, test the fit before gluing to ensure the base slides in smoothly.

Product facts

• 20mm round plastic bases.: VXB005 Victrix 20mm round plastic bases. The high quality plastic bases have a textured upper surface to assist the application of adhesives. They also feature a neat chamfered edge. Ideal to combine with VXB010 skirmish movement trays. Each set contains 120 bases. The textured surface means you can use a standard plastic glue or super glue without worrying about the miniature sliding off, and the chamfered edge saves time on finishing work.