Back to Blog
How-to Guides 2026-11-20 Victrix Limited 28mm miniatures 0 views

How to Apply REP(ESSEX)4 and REP(REN)8 Flag Transfers

How to Apply REP(ESSEX)4 and REP(REN)8 Flag Transfers

Learn how to apply REP(ESSEX)4 and REP(REN)8 flag transfers to your 28mm wargame miniatures. Step-by-step guide for clean, accurate decal placement.

What You Get with REP(ESSEX)4 and REP(REN)8

Both REP(ESSEX)4 and REP(REN)8 are flag transfer sheets designed for wargame banners. They come as uncut transfers, meaning you'll need to carefully separate each design before application. The product images show the pattern, but the actual size may differ from what you see on screen — always check the transfer against your banner before committing.

REP(ESSEX)4 is priced at USD 3.11 (catalog comparison price USD 4.50), while REP(REN)8 costs USD 2.44 (catalog comparison price USD 4.00). Both are sold in standard variants only, with no additional options listed.

Step-by-Step Application Process

Follow these steps to apply REP(ESSEX)4 and REP(REN)8 transfers to your banners. The process is the same for both sheets.

  1. Prepare the banner surface: Make sure your banner is clean and dry. A smooth, primed surface helps the transfer adhere evenly. If the banner has raised details, consider sanding them flat or applying a thin layer of gloss varnish to create a level base.
  2. Cut out the transfer: Using a sharp hobby knife or scissors, cut closely around the desired flag design. Because the transfers come uncut, you have full control over which design you use and how much carrier film remains around it.
  3. Soak the transfer: Place the cut transfer in room-temperature water until the backing paper becomes saturated enough for the film to slide off easily. Avoid over-soaking, which can make the film too fragile.
  4. Position and slide: Slide the transfer onto the banner using a damp brush or tweezers. Position it carefully while the film is still wet — you can adjust it slightly before it dries. Use a soft brush to gently press out any air bubbles or excess water from beneath the film.
  5. Let it dry and seal: Allow the transfer to dry completely. Once dry, apply a thin coat of matte or gloss varnish to protect the decal and blend it into the banner surface. Avoid using too much varnish, which can cause the film to wrinkle.

Common Mistakes to Avoid

Because the supplied information does not include specific measurements or drying times, rely on visual cues. If the transfer feels sticky or looks cloudy, it needs more drying time. Avoid touching the wet film with bare fingers — oils can prevent adhesion. Also, be aware that the actual transfer size may differ from the product image, so test-fit the transfer on a scrap banner first.

Product Evidence

  • REP(ESSEX)4: REP(ESSEX)4: Catalog price USD 3.11 (comparison price USD 4.50). Images may not show actual size. All transfers come uncut. Helps you budget and know what to expect in terms of transfer size and preparation.
    REP(ESSEX)4
    REP(ESSEX)4
  • REP(REN)8: REP(REN)8: Catalog price USD 2.44 (comparison price USD 4.00). Images may not show actual size. All transfers come uncut. A more affordable option; same application process but with a different flag design.
    REP(REN)8
    REP(REN)8

What the Supplied Information Does Not Cover

The catalog records do not provide specific drying times, water temperature guidelines, or varnish recommendations for these transfers. The product images may not reflect the exact scale, so always compare the transfer to your banner before cutting. No instructions are included with the product, so the steps above are based on general decal application best practices for wargame miniatures.

Related Articles

Customer Service
Home
Products
Cart
Profile