Getting Started with Dwarf Shield Transfers
If you're painting 28mm fantasy Dwarves, adding shield transfers is one of the fastest ways to give your miniatures a finished, professional look. The Dwarf shield transfers sheet 3 from Victrix Limited is designed to fit the North Star Oathmark range of fantasy Dwarves, providing authentic heraldic designs for your shield faces and bosses. Before you start, it helps to understand what's on the sheet and how the transfers behave, especially since all transfers (including shield bosses) come un-cut.
What the Sheet Contains
- Dwarf shield transfers sheet 3: 28mm Dwarf shield transfers to fit North Star Oathmark range of fantasy Dwarves Ensures the transfers are the correct scale and shape for your Oathmark Dwarf miniatures, avoiding misalignment or oversize issues.

Dwarf shield transfers sheet 3 - Dwarf shield transfers sheet 3: All transfers (including shield bosses) come un-cut You'll need to cut each transfer individually before soaking, which gives you flexibility to choose specific designs but requires careful handling.
Applying the Transfers Step by Step
Since the transfers are un-cut, you'll need to prepare them before application. Work on a clean, flat surface with good lighting.
- Cut out the transfer: Use a sharp hobby knife or scissors to cut closely around each shield design and boss. Leave a small border of clear film to make handling easier.
- Soak in water: Place the cut transfer in room-temperature water until the design slides freely on its backing paper, following the supplied product instructions.
- Slide onto the shield: Position the transfer on the painted shield surface. Use a damp brush to slide it into place. For shield bosses, apply after the main design is set.
- Remove excess water and set: Gently press from the center outward with a soft cloth or cotton swab to remove air bubbles and water. Let it dry completely.
- Seal with varnish: Once dry, apply a thin coat of matte varnish to protect the transfer and blend it into the shield surface.
Customizing Your Shields
Because the sheet includes multiple designs and separate shield bosses, you can mix and match to create unique combinations for different units or characters. Try pairing a clan symbol with a contrasting boss design, or use the same transfer across a unit for a cohesive look. The un-cut format also lets you trim designs to fit irregular shield shapes if you're converting miniatures from other ranges, though the transfers are specifically sized for Oathmark Dwarves.
What to Watch Out For
The supplied information does not include specific instructions for application or drying times, so rely on standard transfer techniques. Avoid using too much water, which can cause the design to shift. If a transfer tears, you can often salvage it by applying a thin layer of gloss varnish first to strengthen the film. For best results, apply transfers to a gloss or semi-gloss painted surface, then seal with matte varnish to reduce shine.


